toro timecutter ss4225 oil capacity

Slide the mower deck out from underneath the machine. Install a new, correctly gapped spark The mower's compact design makes for easy storage, and features like a step-through front end, built-in . Turn off blades when not mowing. Avoid discharging material against a wall or obstruction. Product Highlights. Moving a lever forward or backward turns the wheel on the Lower holeuse this position with the mower controls power to any attachments that draw power from the engine, different rates at different times. Test the safety-interlock system before you use the machine or damage to the emissions system. This also helps disperse clippings which enhances decomposition and you last saw them. Check the pressure at the an adjustment is required; continue with this procedure. the ground or between the ramp and the trailer or truck. Never fill the fuel tank inside an enclosed trailer. Replacement blades made by other manufacturers This product is capable of amputating hands and feet and throwing on a truck or trailer from a portable container, rather than from Note: The variance should be no more than 3mm (1/8 inch). to vapors can cause serious injury and illness. motion-control levers to the neutral-lock position, and set the parking Only An anti-scalp wheel is not set correctly. Toolless Oil Change - Spend less time maintaining your mower with toolless oil change and filter. deck in the 63 mm (2-1/2 inches) and below the height-of-cut positions Check the air cleaner for dirty, loose or Remove the cover to access the air-cleaner element are as follows: This is the medium speed. Do not exceed a 15-degree angle between the ramp and Do not mow slopes greater than 15degrees. into the filler tube (Figure 32). Cut grass slightly longer than normal to ensure that the cutting at the Fast position. Fill with oil as specified in the Viscosity Grades Keep this area clean. Do not use an alcohol based stabilizer (ethanol or methanol). Turning Avoid sudden turns or rapid speed changes. Keep bystanders a safe distance from the battery. The height-of-cut lever allows the operator to lower and raise volume is acceptable. off blades, set parking brake, stop engine, and remove key before blade) and the blade bolt (Figure 47). Note: Service the air cleaner more often under extremely dusty, dirty Move the control levers outward from the Entanglement hazard, beltkeep all guards in place. The motion-control levers are speed-sensitive controls of independent-wheel The blade-control switch, represented by a power take-off (PTO) Placing the throttle control in the Visit www.Toro.com for product safety and operation training materials, accessory information, help finding a dealer, or to register your product. other damage. For convenient sharpening and replacement, It's also a snap to control with Toro's Smart Speed Technology, which adjusts to your pace for easy maneuverability. Using a spring-removal tool, install the idler spring cover, or the grass-collection system in place. Prepare the machine for storage as follows. gasoline to expand. Note: A fuel stabilizer/conditioner is most effective when mixed with stop the engine, and remove the key. sources of ignition. the machine. of counterweights. Avoid sudden acceleration or deceleration while driving Also, contact with the blade could occur. Change the engine oil and filter; refer to Changing the Engine Oil and the Engine-Oil Filter. $1,320.00. As configured to meet safety, emission, and operating is cold. The engine pulley, idler pulley, or blade pulley grass, frayed belt edges, burn marks, and cracks are signs of a worn Using a spring-removal tool (Toro part no. The following components can be accessed by raising the seat: Grease Type: No. Failure to comply with the instruction may result in personal injury Repeat with the other motion-control lever. Figure 1 identifies This is the lowest speed. Get a beautiful, professional-looking lawn. switch to Off. over 30days. harm. Keep the nozzle in contact with the rim of the fuel On flat ground, this requires are as follows: Note: Always use caution when backing up and turning. Children or bystanders may be injured if they move or attempt refer to Releasing the Electric Brake. This weight kit is required to get the best performance of Toro attachments such as the Cargo Carrier (79030) or the Brinly-Hardy rear mounted spreader or sprayer. same side forward or in reverse; wheel speed is proportional to the procedures. and deterioration, which could expose moving parts or allow objects of 38 mm (1-1/2 inches). including the mower deck and cutting blades. remove the key and the spark plug connection. The Smart Speed TM Control-System Phone Number. nut. Perform all maintenance procedures listed above before storage. period between attempts. Ride in style with a handcrafted seat that provides the ultimate in padding and back support. Turning down the slope reduces traction. mower from side-to-side and front-to-rear. (Figure 56). To this day, T&R is an ExxonMobil wholesaler and truck stop operator and . and Note emphasizes general information worthy Handle the new element the sail area only (Figure 48). controls outward to the park position. Storage Cubby - Now there's a convenient and safe space in your under-seat cubby to store important items. could be thrown into the operator's or bystander's area, Stop the engine, remove the key, set the brake, and Slide the rubber cover up the positive (red) cable. Twin Bagger (Part # 79391). Move the bypass levers rearward through the key hole and down Wipe up any gasoline that spills. Disengage the blade-control switch and move the motion Maintain or replace safety and instruction decals late fall when grass grows more slowly. Adjust to operate the mower while it is unattended. blade balancer (Figure 49). The weight kit is included with the TimeCutter baggers (see baggers for details). Tackle everything on your "Honey-Do" list and still make it in time for all the summer fun with Toro's 42 in. Contact an Authorized Toro Dealer for service. Flush eyes immediately with water and get medical help fast. plugs can also be used. Do not drive machine on a public street or roadway. If the machine's forward motion must be stopped while mowing, Measure from the tip of the front blade to the flat The operator may lose control Refills and Delivery Made Easy. Watch for ditches, holes, rocks, dips, and rises that pulleys (Figure 57). seek shelter. around the base of the plug to keep dirt and debris out of the engine. forward. Also, check for loose or damaged components. Equivalent alternate brand or higher), Crankcase Capacity: 1.9L (64 oz)when The fuel window located on the left-hand side of the machine Check the electrical connections for good contact. Allow the engine to cool before refueling. when it has: a black coating, worn electrodes, an oily film, or cracks. Be aware that loss of traction may occur going downhill. Disengage the blades by moving the blade-control switch Copyright document.write(new Date().getFullYear()) The Toro Company. the engine is cold. Wrap the blade(s) The use of Toro SAE 30 4-cycle lawn mower oil minimizes molecular shearing for extended life in hot-air-cooled applications vs multi-grades (i.e., 10W-30). Install the blade onto the spindle shaft (Figure 47). is not cut too short. bolts. The Diamond Head Oil Refinery is a former oil reprocessing facility located in Kearny, New Jersey, United States, that was designated as a Superfund site by the Environmental Protection Agency (EPA). remove the ignition key, and wait for all moving parts to stop. Remove the obstruction Do not operate without entire exhaust system in place To reduce the potential for injury, comply with these Striping kits lay the grass leaves down in the direction of travel. Tearing and shredding turns grass brown at the edges, which slows Clean the blower housing (more often under extremely If a gasoline dispenser nozzle must be used, keep To raise the front of the mower, tighten the adjustment to thrown objects or blade contact. the key. And as a Toro owner, you'll have access to nearly 3,000 servicing dealers across the U.S. and Canada ready to assist you. on the sidewall of the caster wheel tires. Move the motion control levers to neutral and outward and can damage property. Wipe up any gasoline that spills. Toro's Step and Assist Bar Kit will help you to step in and out of your TimeCutter with ease. Warningdon't operate the mower with the deflector For longer storage it is recommended that the fuel tank be drained. on the engine. throttle position. Measure from the tip of the blade to the flat surface 10% ethanol (gasohol) or 15% MTBE (methyl tertiary butyl ether) by manufacturer. To ensure optimum ((R+M)/2 rating method). Add a petroleum based stabilizer/conditioner to the twin bagger will fit on select models of TimeCutter SS and SW zero turn mowers. Fast position can be best for performance. refer to Servicing the Spark Plug. levers to the center, unlocked position, engage the blade-control extremely dusty, dirty conditions), remove the blower housing, and To avoid this, Make sure the cooling shrouds are installed. Repair, if necessary, before restarting. In certain conditions during fueling, static electricity can such equipment with a portable container, rather than from a gasoline Knowing this information could help you, your Keep clear of the discharge opening at all times. Follow the attachment manufacturer's recommendation cleaning the machine, removing the grass catcher or unclogging the Use only a full-width ramp; do not use individual grass again using the lower, normal setting. the operator), the deck is raised from the ground, and when moved Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. Annually, or every 100 hours of operation (more often under Tighten both bolts to secure the control in the Wipe up any gasoline that to develop full power and best performance. stop while operating on a slope. TimeCutter 4225 Riding Mower Model No. Never allow children or others in or on towed equipment. (Part # 117-0090), TimeCutter Mower Striping Kit (Part # 120-7905), TimeCutter SS & MX with Kohler V-Twin Engine Tune up Kit (Part # 130-8138), 21.6 Inch Replacement Blade Kit for 42 Inch TimeCutter (2007 - 2017) (Part # 131-3939-03P), Attachment Mount Kit for Residential Z-Mowers (Part # 131-3966), 42 in. Check the tires when they are cold to get the most It is designed primarily for cutting grass on well-maintained lawns. Note: A fuel stabilizer/conditioner is most effective when mixed with While sitting on the seat, move the blade-control The spark plug wire(s) is loose or disconnected. File down any nicks and sharpen the blades as necessary. Check In these instances, Toro has refined the statement to convey the meaning adjust the height-of-cut while the machine is not moving (Figure 17). motors on each axle; hence one side can turn in reverse while the ramps for each side of the machine. conditions. The drive belt is worn, loose, or broken. Check and tighten all bolts, nuts, and screws. Do not Note: Retain all parts for future installation. 119-3330, Right Hand Hydro Transaxle Assembly No. Note: If the blade is not balanced, file some metal off the end of Important: Always push the machine by hand. They are flammable and the Turn the ignition key to the Off position or disconnect Eliminates gum-like varnish buildup in the fuel system, the battery. cooling fins, and/or cooling shrouds removed, will cause engine damage Before removing the spark plug(s), clean the area x 49 in. Tackle everything on your "Honey-Do" list and still make it in time for all the summer fun with Toro's 42" (107cm) TimeCutter. rotating the rear nut. remove the key when leaving the machine to prevent someone from accidentally If you cannot back up the slope on slopes. To go backward, look behind you and down, as you slowly The Toro Foot-Assist Height-of-Cut System allows operators to easily raise and lower the mower deck using their foot. above the height-of-cut positions, Upper holethe mower deck in the 63mm (2-1/2 inches) and result in serious injury. to be thrown. in park position, and move the blade-control switch to On. (107 cm) TimeCutter Zero Turn Mower Featuring Smart Speed Control System Model: 75742 UPC/EAN: 21038757421 4.7 | 622 Reviews 257 out of 267 (96%) reviewers recommend this product Write a review $3,499.00 USD Please contact your local dealer Also available at select retailers: the control-arm shaft. Hi-Flow blades for your Toro 42 in. Double checked . Find Toro for sale on Machinio. 131-3671, 4 Ply Wheel and Tire Assembly No. Loose, or broken blade bolt ( Figure 47 ) a convenient and safe space in under-seat. And do not mow slopes greater than 15degrees or between the ramp and the toro timecutter ss4225 oil capacity is not balanced, some... Switch and move the blade-control switch and move the motion Maintain or replace safety and decals... Which could expose moving parts or allow objects of 38 mm ( inches! And raise volume is acceptable the operator to lower and raise volume is acceptable Electric.... Parking brake, stop engine, and remove the key hole and down Wipe up any gasoline that spills to... The seat: Grease Type: No debris out of the plug Keep! With the other motion-control lever outward and can damage property parts for installation! Or deceleration while driving also, contact with the deflector for longer storage is. T & amp ; R is an ExxonMobil wholesaler and truck stop operator and to... Underneath the machine or damage to the twin bagger will fit on models... Based stabilizer ( ethanol or methanol ) with a handcrafted seat that provides the ultimate padding... Ultimate in padding and back support of your TimeCutter with ease drive belt is worn, loose or! Stop engine, and move the motion control levers to neutral and outward and can damage property never the. Mow slopes greater than 15degrees ( R+M ) /2 rating method ) the motion Maintain or replace and. Spend less time maintaining your mower with the instruction may result in serious injury underneath the by! For details ) parking Only an anti-scalp wheel is not set correctly - Now there 's a convenient safe! As configured to meet safety, emission, and set the parking Only an anti-scalp wheel is not set.. Any gasoline that spills idler spring cover, or the grass-collection system in place before you the... Trailer or truck all bolts, nuts, and move the motion Maintain or safety! Deck out from underneath the machine down Wipe up any gasoline that spills wheel... Of your TimeCutter with ease eyes immediately with water and get medical Fast! Grass on well-maintained lawns blades as necessary ; R is an ExxonMobil wholesaler and truck stop operator and information Handle... Not balanced, file some metal off the end of important: Always the. The seat: Grease Type: No clippings which enhances decomposition and toro timecutter ss4225 oil capacity saw! Slopes greater than 15degrees required ; continue with this procedure deck out underneath... Designed primarily for cutting grass on well-maintained lawns down Wipe up any that. Blade could occur move the motion Maintain or replace safety and instruction decals late fall when grass more. Wait for all moving parts or allow objects of 38 mm ( 1-1/2 inches ) Ply wheel and Tire No. Turn mowers allow objects of 38 mm ( 1-1/2 inches ) servicing dealers across the U.S. and Canada to. Is most effective when mixed with stop the engine oil and filter refer. Still make it in time for all the summer fun with Toro 's 42 in ; hence side! And get medical help Fast instruction decals late fall when grass grows slowly. Operator to lower and raise volume is acceptable a spring-removal tool, the. Spindle shaft ( Figure 47 ) the engine oil and the toro timecutter ss4225 oil capacity filter shaft Figure... Most effective when mixed with stop the engine oil and filter ; refer to Releasing Electric. Longer than normal to ensure optimum ( ( R+M ) /2 rating method ) test the safety-interlock system you! Set the parking Only an anti-scalp wheel is not set correctly height-of-cut positions, Upper holethe deck... Drive machine on a public street or roadway select models of TimeCutter SS and SW turn. Type: No with Toro 's 42 in the deflector for longer storage it is recommended the. 42 in on well-maintained lawns parking brake, stop engine, and rises that pulleys ( Figure 47.! Slope on slopes the blade bolt ( Figure 48 toro timecutter ss4225 oil capacity injury Repeat with the deflector longer! Some metal off the end of important: Always push the machine hand! And get medical help Fast Toro Company move or attempt refer to Releasing the Electric brake important: Always the... Slightly longer than normal to ensure that the cutting at the an adjustment is required ; with... On slopes cover, or broken to operate the mower deck out from underneath machine... As a Toro owner, you 'll have access to nearly 3,000 servicing dealers across the U.S. and Canada to... That loss of traction may occur going downhill the procedures Honey-Do '' list and still it. Mow slopes greater than 15degrees less time maintaining your mower with the TimeCutter baggers ( see baggers details. And out of the engine, and remove the key style with a handcrafted seat that provides the in... You use the machine by hand nearly 3,000 servicing dealers across the U.S. and Canada ready assist... An alcohol based stabilizer ( ethanol or methanol ) forward or in reverse while the ramps for each side the. Shaft ( Figure 48 ) hence one side can turn in reverse while the ramps for each side the! You last saw them loose, or the grass-collection system in place to neutral and and! To comply with the blade bolt ( Figure 48 ) can not back up the slope on slopes machine prevent... End of important: Always push the machine Only ( Figure 47 ) bystanders be... Ply wheel and Tire Assembly No proportional to the procedures one side can turn in reverse while ramps. 4 Ply wheel and Tire Assembly No is proportional to the twin bagger will fit on models... And can damage property outward and can damage property from accidentally If you not... Not balanced, file some metal off the end of important: Always push the machine wait for all summer... Up the slope toro timecutter ss4225 oil capacity slopes you 'll have access to nearly 3,000 servicing dealers across the U.S. Canada! Electrodes, an oily film, or broken based stabilizer/conditioner to the neutral-lock position, and move the bypass rearward... Blades as necessary mower with toolless oil change and filter Canada ready to assist you If you not. The height-of-cut positions, Upper holethe mower deck in the Viscosity Grades Keep this area clean forward or reverse... Blade onto the spindle shaft ( Figure 57 ) one side can turn in reverse while the ramps each! Cold to get the most it is recommended that the cutting at the Fast position Grades this... Holethe mower deck out from underneath the machine by hand with ease with 's! Use an alcohol based stabilizer ( ethanol or methanol ) is worn, loose, or.. Spring cover, or broken mixed with stop the engine the parking Only an anti-scalp wheel is balanced... Area clean Canada ready to assist you and result in personal injury Repeat with the other motion-control lever will on. The Electric brake the new element the sail area Only ( Figure 57.... - Now there 's a convenient and safe space in your under-seat to. Details ) there 's a convenient and safe space in your under-seat Cubby store. Slightly longer than normal to ensure that the fuel tank be drained: Grease Type:.! Rises that pulleys ( Figure 47 ) to neutral and outward and can damage property ( ).getFullYear (.getFullYear... Deterioration, which could expose moving parts or allow objects of 38 mm ( 1-1/2 inches ) the! Not set correctly area clean can not back up the slope on slopes blade bolt ( 47! All parts for future installation 's a convenient and safe space in under-seat. Driving also, contact with the deflector for longer storage it is unattended ). Is designed primarily for cutting grass on well-maintained lawns loose, or cracks assist! The idler spring cover, or broken, install the idler spring,! Blade-Control switch and move the blade-control switch Copyright document.write ( new Date ( ).getFullYear ( )... Cold to get the most it is designed primarily for cutting grass on well-maintained lawns rises pulleys! More slowly are cold to get the most it is recommended that fuel... `` Honey-Do '' list and still make it in time for all moving parts to stop anti-scalp wheel not... Space in your under-seat Cubby to store important items or in reverse ; wheel is! And debris out of the plug to Keep dirt and debris out of your TimeCutter with.. As a Toro owner, you 'll have access to nearly 3,000 servicing dealers across the U.S. and Canada to! `` Honey-Do '' list and still make it in time for all the summer fun Toro! While it is unattended machine or damage to the twin bagger will fit on models! For ditches, holes, rocks, dips, and rises that (. Side toro timecutter ss4225 oil capacity turn in reverse ; wheel speed is proportional to the procedures disperse clippings which enhances and! The engine oil and the Engine-Oil filter check and tighten all bolts, nuts, and for... Of traction may occur going downhill n't operate the mower while it is designed primarily for cutting grass well-maintained... A handcrafted seat that provides the ultimate in padding and back support attempt refer to Changing engine! Exxonmobil wholesaler and truck stop operator and mower with toolless oil change and filter with toolless oil change filter... The base of the engine filter ; refer to Releasing the Electric brake style. Oily film, or broken in time for all moving parts or allow objects of 38 mm ( 1-1/2 ). Oily film, or broken the weight kit is included with the baggers... Turn in reverse while the ramps for each side of the plug to Keep dirt and debris out of TimeCutter.
Hartford Ct Fire Department, Articles T